Deformation Measurements on Rectangular Air-ducts and Parts of the Rectangular Duct Connections: Since their introduction into the market (Patent No. 1 946 547 dated 13.09.1969), the METU-SYSTEM triangular shaped profiles (MM, HM, RM) provide an optimal stability to the rectangular duct connections. The independent MPA tests (only available in German), conducted on October 11th, 1972, proved the superior stability of the METU-SYSTEM profiles when compared to other profiles and rectangular duct connection methods available at that time, including angle iron.
The METU Rectangular duct connection are still considered by many users today to be the strongest on the market, reducing or even eliminating the necessity to use clamps. No Ex or ATEX certifications.
hd = with injected sealant (see also ZI-401)
E = with leading edge (with A).
F = without leading edge (w/o A).
Information about materials (galv. stainless, etc.) : ZI-101
Max. duct-wall thicknesses:
M2-0,7-Profiles = 1,0 mm
M2-0,9-Profiles = 1,0 mm
M3-0,8-Profiles = 1,0 mm
M3-0,9-Profiles = 1,0 mm
M3-1,2-Profiles = 1,2 mm
M4-1,2-Profiles = 1,2 mm
M4-1,5-Profiles = 1,2 mm
Art.Nr. | Description | A | B | C | D | S | L |
A01A-2001 | M2-0,7-Profile galv (w/o A) | 20 | 25 | 13 | - | 0,7 | 5000 |
A01A-2002 | M2-0,7-Profile galv hd (w/o A) | 20 | 25 | 13 | - | 0,7 | 5000 |
A01A-2003 | M2-0,7-Profile galv (with A) | 20 | 25 | 13 | 10 | 0,7 | 5000 |
A01A-2004 | M2-0,7-Profile galv hd (with A) | 20 | 25 | 13 | 10 | 0,7 | 5000 |
A01A-2009 | M2-0,9-Profile galv (w/o A) | 20 | 25 | 11 | - | 0,9 | 5000 |
A01A-2010 | M2-0,9-Profile galv hd (w/o A) | 20 | 25 | 11 | - | 0,9 | 5000 |
A01A-2011 | M2-0,9-Profile galv (with A) | 20 | 25 | 11 | 8 | 0,9 | 5000 |
A01A-2012 | M2-0,9-Profile galv hd (with A) | 20 | 25 | 11 | 8 | 0,9 | 5000 |
A01B-2015 | M2-0,8-Profile V2A w/o foil (w/o A) | 20 | 25 | 11 | - | 0,8 | 5000 |
A01C-2009 | M2-0,8-Profile Alu (w/o A) | 20 | 25 | 11 | - | 0,8 | 5000 |
A01A-3005 | M3-0,8-Profile galv (w/o A) | 30 | 32 | 15 | - | 0,8 | 5000 |
A01A-3006 | M3-0,8-Profile galv hd (w/o A) | 30 | 32 | 15 | - | 0,8 | 5000 |
A01A-3007 | M3-0,8-Profile galv (with A) | 30 | 32 | 15 | 11 | 0,8 | 5000 |
A01A-3008 | M3-0,8-Profile galv hd (with A) | 30 | 32 | 15 | 11 | 0,8 | 5000 |
A01A-3009 | M3-0,9-Profile galv (w/o A) | 30 | 32 | 15 | - | 0,9 | 5000 |
A01A-3010 | M3-0,9-Profile galv hd (w/o A) | 30 | 32 | 15 | - | 0,9 | 5000 |
A01A-3011 | M3-0,9-Profile galv (with A) | 30 | 32 | 15 | 8 | 0,9 | 5000 |
A01A-3012 | M3-0,9-Profile galv hd (with A) | 30 | 32 | 15 | 8 | 0,9 | 5000 |
A01A-3013 | M3-1,2-Profile galv (w/o A) | 30 | 32 | 15 | - | 1,2 | 5000 |
A01A-3014 | M3-1,2-Profile galv hd (w/o A) | 30 | 32 | 15 | - | 1,2 | 5000 |
A01A-3015 | M3-1,2-Profile galv (with A) | 30 | 32 | 15 | 8 | 1,2 | 5000 |
A01A-3016 | M3-1,2-Profile galv hd (with A) | 30 | 32 | 15 | 8 | 1,2 | 5000 |
A01B-3015 | M3-0,8-Profile V2A w/o foil (w/o A) | 30 | 32 | 15 | - | 0,8 | 5000 |
A01C-3009 | M3-0,8-Profile Alu (w/o A) | 30 | 32 | 15 | - | 0,8 | 5000 |
A01C-3013 | M3-1,2-Profile Alu (w/o A) | 30 | 32 | 15 | - | 1,2 | 5000 |
A01A-4013 | M4-1,2-Profile galv (w/o A) | 40 | 40 | 17 | - | 1,2 | 5000 |
A01A-4014 | M4-1,2-Profile galv hd (w/o A) | 40 | 40 | 17 | - | 1,2 | 5000 |
A01A-4017 | M4-1,5-Profile galv (w/o A) | 40 | 40 | 17 | - | 1,5 | 5000 |
A01A-4018 | M4-1,5-Profile galv hd (w/o A) | 40 | 40 | 17 | - | 1,5 | 5000 |
A01B-4015 | M4-1,2-Profile V2A w/o foil (w/o A) | 40 | 40 | 17 | - | 1,2 | 5000 |
A01B-4016 | M4-1,2-Profile V2A hd w/o foil (w/o A) | 40 | 40 | 17 | - | 1,2 | 5000 |
A01C-4017 | M4-1,5-Profile Alu (w/o A) | 40 | 40 | 17 | - | 1,5 | 5000 |
Flectional Strength of METU-SYSTEM Profiles Made of Galvanized Steel
The following figures are indications only and do not replace the judgment and analysis of the user with respect to the contemplated application. The stability depends on the sheet metal thickness.
cm4: Moment of inertia x / y at the center of gravity
cm3: Section modulus x / y at the center of gravity
cm4 ( Ixs / Iys ) | cm3 ( Wxs / Wys ) | ||
A01A-2001 | M2-0,7-Profile (w/o A) | 0,3284 / 0,3037 | 0,2012 / 0,2242 |
A01A-2003 | M2-0,7-Profile (with A) | 0,3265 / 0,3018 | 0,2000 / 0,2234 |
A01A-2009 | M2-0,9-Profile (w/o A) | 0,3183 / 0,3871 | 0,2135 / 0,2853 |
A01A-2011 | M2-0,9-Profile (with A) | 0,3164 / 0,3843 | 0,2168 / 0,2842 |
A01A-3005 | M3-0,8-Profile (w/o A) | 0,7200 / 1,0250 | 0,3560 / 0,5480 |
A01A-3007 | M3-0,8-Profile (with A) | 0,7150 / 1,0180 | 0,3590 / 0,5450 |
A01A-3009 | M3-0,9-Profile (w/o A) | 0,8150 / 1,1520 | 0,4000 / 0,6120 |
A01A-3011 | M3-0,9-Profile (with A) | 0,8090 / 1,1440 | 0,4080 / 0,6090 |
A01A-3013 | M3-1,2-Profile (w/o A) | 1,2250 / 1,6010 | 0,5880 / 0,8150 |
A01A-3015 | M3-1,2-Profile (with A) | 1,2180 / 1,5900 | 0,5970 / 0,8120 |
A01A-4013 | M4-1,2-Profile (w/o A) | 2,4160 / 3,6760 | 0,9150 / 1,4330 |
A01A-4017 | M4-1,5-Profile (w/o A) | 3,0820 / 4,5630 | 1,1660 / 1,7460 |