Measuring Bands MRF

Measuring Bands MRF

For the precise measurement of the inner duct diameters according to DIN EN 1506.

Any deviation from the standard dimension (+ or -) can be read precisely (mm) on a scale.

Instructions

The MRF Measuring Bands have been designed for ducts manufactured according to DIN EN 1506. Fix the end of the band with the printed scale inside the duct, using a clamp if necessary. Then position it around the circumference and parallel to the duct end. The inner circumference can be then read on the scale.

The black mark on the scale indicates the precise DIN EN 1506 dimension and the red mark the maximum permissible dimension. Standard METU-SYSTEM flanges can be used if the duct is within the shown 
tolerance.

Should the circumference be outside the tolerance, the deviation from the standard circumference is indicated in mm. By mentioning this deviation when ordering will allow us to manufacture the correct flange size.

Beispiele

The end of the band indicates DIN - 20 mm. The duct inner circumference is therefore 20 mm shorter than the standard (DIN EN 1506). Place your order accordingly.

The end of the band indicates DIN + 20 mm. The duct inner circumference is therefore 20 mm larger than the standard (DIN EN 1506). Place your order accordingly.

The end of the band reaches the marking of the standard circumference (DIN EN 1506). A standard 355 mm flange Ø can therefore be ordered.

Circumference and diameter measurements

 

List of Products & Prices

Checking the inner duct diameter