EPDM for MU Overcollars (ZI-208)
Mostly MU Overcollars. The gasket is glued to the 315 mm Ø MU Overcollars and above. Glue: Terokal 2444 (polychloroprene basis, operating temperature from -30°C to +90°C)
Closed-cell, flexible rubber gasket.
Ethylene Propylene Diene Monomer Rubber HY/EPDM. (DIN ISO 1629).
Without silicon, halogen or Polytetrafluorethylene.
Adhesive (when applicable):
Acrylic dispersion. Liner: Protective film made of siliconized (*) paper.
(*) Self-adhesive products are usually fitted with a siliconized protective foil applied over the bounding surface. To install the product this foil must be removed: it is therefore not part of the product. The gasket material itself is silicon-free. It is possible however, that silicon traces are detected, as they can be transmitted to other parts during handling operations. An absolute silicon-free guarantee can, for that reason, not be given.
from ≈ -40°C to ≈ +70°C (temporarily up to ≈ +80°C)
Behavior in Fire
Building Material Class: B3, easily inflammable
Fire Resistance: not applicable
Smoke Emission: not specified
Very good ozone, aging and weather resistances.
Weathering and UV resistance (DIN 53 386): Should not be directly exposed over long periods of time to the weathering agents.
Ozone Resistance (DIN 53 509): Tear-building 0.
Mineral oils and fats: not resistant
Organic oils and fats: medium resistance
Softeners (commercial quality): resistant
Solvents: not resistant
Acetone: medium resistance
Ammonia: not specified
Chlorine or chlorine gas: medium resistance
Ethyl acetate: not specified
Ethyl alcohol: not specified
Ethylene glycol: not specified
Methanol: not specified
Propylene Glycol: not specified
The a.m. resistances are valid for the gasket only. The adhesive is made of acrylate dispersion and offers therefore a limited resistance to chemicals.
Please bear in mind that elastomers have generally a limited lifetime (i.e. through aging). For that reasons we recommend regular inspection and replacement intervals.
Chemicals and oils are available in very different qualities. Their properties vary depending on their concentration, operating temperatures, possible mix with other chemicals and the eventual presence of impurities. This is why gasket manufacturers only provide general information about the resistance of their products to various chemicals. In view of the above it is advisable that the client runs some tests in order to assess if the gaskets are suitable for the intended application. We regret not being able to provide more precise information.
Safety data sheet
Available upon request (PDF document).
Do not contain any particular SVHC substances likely to raise concerns according to the current,
extended REACH candidate lists, dated 30-01-2010.
Safety Data Sheet
Available upon request
Please refer to the ZI-102
The present additional information have been compiled carefully. They are only indications intended to provide counsel. They are the result of internal tests and information provided by our suppliers. There is no guarantee for completeness and accuracy. More precise information can only be made available through focused tests on a case by case basis. The provided indications do not discharge the user from conducting his own tests. Please make sure that the product is suitable for the intended use. Changes, errors and omissions excepted. Free translation: the German version prevails.