Vitreous Fibers Gasket GF (ZI-206)
F13V-1202, GF 6 × 3 mm
For rectangular ductwork less than 1000 mm wide
For round flanges and Joining clips SR 20 - 45 (from 200 to 499 mm Ø)
For SS Joining Clips
F13V-1203, GF 10 × 6 mm
For rectangular ductwork wider than 1000 mm
For round flanges and joining clips SR 50 - 90 and SR 100 - 160 (from 500 to 3000 mm Ø)
For all access door dimensions
The GF gasket is a high temperature, asbestos-free vitreous/glass fiber gasket, with a self-adhesive side. Because of its excellent biological solubility is it classified as not carcinogenic. For this reason, a hazardous substance classification is unnecessary. In view of its temperature resistance and low thermal conductivity, this material is particularly well suited for insulation purposes. Self-adhesive, asbestos-free, high temperature glass fiber gasket. Fiber diameters 3,2 µm. Color: white. The product is halogen-free. Adhesive: acryl dispersion. Protective foil: siliconized film (*), white.
(*) All self-adhesive products are usually fitted with a siliconized protective foil applied over the bounding surface. To install the product this foil must be removed: it is therefore not part of the product. The gasket material itself is silicon-free. It is possible however, that silicon traces are detected, as they can be transmitted to other parts during handling. An absolute silicon-free guarantee can, for that reason, not be given.
≈ + 1.100 °C: Fibers temperature resistance.
≈ + 250 °C: Temperature at which the bonding agent holding the fibers together loses its adhesive properties.
≈ + 200 °C: Temperature at which the self-adhesive side of the gasket loses its adhesive properties.
In view of the above it is recommended to replace the GF gaskets on all METU-SYSTEM products having been subjected to temperatures above 200°C, as the gasket might have lost its mechanical properties and crumble.
Behavior under Fire
Building Material Classification : no information available
Fire resistance: no information available
Smoke emissions: no information available
Weathering and UV Resistances (DIN 53 386): The fibers are UV resistant.
Ozone resistance (DIN 53 509): not tested.
Acetone : resistant
Acids : not resistant
Ammoniac: not resistant
Chlorine or chlorine gas: resistant
Ethyl Acetate : resistant
Ethyl Alcohol: resistant
Ethylene Glycol: resistant
Fat dissolving cleaning agents: not tested
Mineral oils and greases: resistant
Organic oils and greases: resistant
Propylene Glycol : resistant
Softeners (commercial quality): resistant
Solvents : not tested
Superheated Steam (up to 160°C to 180°C, short periods / cleaning): resistant
Water Steam: resistant
Fibers can be soaked with liquids. The resistances are valid for the fibers only, and not for the adhesives or other components. The adhesives have only a limited resistance against chemicals.
The fibers themselves are oil-resistant. The gasket will however absorb oil, negatively influencing the adhesive properties of the bonding agent. Under such circumstances, the temperature resistances can also be affected.
Chemicals are available in very different qualities. Their properties vary depending on their concentration, operating temperatures, possible mix with other chemicals and the eventual presence of impurities. This is why gasket manufacturers only provide general information about the resistance of their products to various chemicals. In view of the above it is advisable that the client runs some tests in order to assess if the gaskets are suitable for the intended application. We regret not being able to provide more precise information.
Does not contain any substances (SVHC) which could be of concern according to the REACH extended list dated 13-01-2010.
Safety Data Sheet
Document only available in german
Please refer to the ZI-102
The present additional information have been compiled carefully. They are only indications intended to provide counsel. They are the result of internal tests and information provided by our suppliers. There is no guarantee for completeness and accuracy. More precise information can only be made available through focused tests on a case by case basis. The provided indications do not discharge the user from conducting his own tests. Please make sure that the product is suitable for the intended use. Changes, errors and omissions excepted. Free translation: the German version prevails.